Water Meter For Irrigation System
Water Meter For Irrigation System for agriculture, landscaping, yards, golf courses, or filling swimming pools.
| Material | Cast Iron |
|---|---|
| Connect | Flange |
| Ratio | R80 |
| Pulse | Optional |
| Coating | Optional |
Product Details
Water Meter For Irrigation System
- Specifically designed to measure water used for agriculture, landscaping, yards, golf courses, or filling swimming pools.
- Iron body with inside and outside epoxy coating for protecting the corrosion
- Flange connection: DIN PN16/10, ANSI 125/150lb
- The copper can super dry register with IP68 protection
- The entire head area including the counter and transmitter is 360° rotatable for an easy reading
- The interchangeable, removable measuring mechanism can be easily removed from the body for checking, maintaining, and replacing, no need to dismantle the body from the pipe
- Wear-resistant plastic bearings
- Dial Plate Design can be as per the customer’s requirement
- Magnetic transmission, Low-pressure loss
Pulse output is available, details are as follows:
- The Pulse Emitter Device consists of a plastic housing with Reed Switch, and 1,5 m cable with 2 cores in Red and Black
- electric Data: Vmax=24AC/DC; Imax=0,01A
- Capacity of the Pulse Emitter:
Working Conditions
- Temperature: Available for cold water 0-50 ℃
- Pressure: ≤1.6MPa ( 16bars)
Standards Compliance
- ISO4064:2014/OIML R49
- Directive 2014/32/EU on measuring instruments
- European Standard EN14154
Dimension (Flange Standard for selecting like DIN, ANSI…)

Technical Data
MAX. PERMISSION ERROR:
- From Q1 inclusive up to but excluding Q2 is ± 5%
- From Q2 inclusive up to and including Q4 is ± 2% for T30 and ± 3% for T50
Our 35,000 m² facility and 20+ years of experience back our 10-year quality guarantee.
Connect with our customer service team to request samples and discuss our flexible minimum order policies.
Related Products









