1″ Wasserzähler MID-zertifiziert

1″ Water Meter

1″ water meter corresponds to a nominal diameter of ​​DN25​​ (25mm in diameter), also called DN25 Water Meter. This specification is primarily used in industrial and manufacturing facilities that require high flow rates Und high water pressure. Its design ensures reliability in demanding environments, such as large-scale water distribution systems or production lines with significant water consumption demands.

1″ Water Meter Flow Rate

According to ISO 4064, R160 1″ water meter flow rate:

1 inch water meter minimum flow rate Q₁ is 39.375 l/h.
1 inch water meter transitional flow rate Q₂ is 63 l/h.
1 inch water meter permanent flow rate Q₃ is 6.3 m³/h.
1 inch water meter overload flow rate Q₄ is 7.875 m³/h.

1″ Water Meter Installation

According to the design schemes of different water meters, the installation direction of the 1″ water meter will affect its measurement accuracy. For horizontal water meters, the accuracy during horizontal installation is higher than that during vertical installation.

1″ water meter Horizontal installation accuracy R160
1″ water meter Vertical installation accuracy R80

1″ Water Meter with Fittings

Water meter fittings also play a crucial role in determining water quality.
BMAG’s 1-inch water meters are equipped with high-quality brass fittings and plastic check valve cores.
The water meter check valve core effectively prevents water backflow, which can otherwise affect the water meter’s measuring.

1″ Water Meter Feature

• High precision: R160-Horizontal/R80-Vertical
• High protection class: IP68
• Multi-jet working principle assures a long service time
• Low-pressure loss: Δ63
• Straight inlet or outlet needed: U0 D0
• Rotating: 359 degrees
• Certification: MID
• Es ist ein Spezialglas mit hoher Druck- und Stoßfestigkeit erhältlich.
• Gehäuse aus elektrostatisch lackiertem, korrosionsbeständigem Messing
• Schutz vor äußeren Magnetfeldern
• Impulsausgang und AMR-Lesefunktionen sind optional
• Rückschlagventil und Filter erhältlich
• Geeignet für Trinkwasser, Kaltwasser bis 50°C
• Fast kein Wartungsaufwand
• Vakuummechanismus

1″ Multi Jet Water Meter Working Conditions

• Temperatur: Verfügbar für kaltes Wasser 0-50 ℃
• Druck: ≤ 1,6 MPa (16 bar)

Dial Plate Design (DN25, R160)

Einhaltung von Standards

• ISO 4064:2014/OIML R49
• Richtlinie 2014/32/EU über Messgeräte
• Europäische Norm EN14154

Abmessungen

Technische Daten

Unser 35.000 m² Einrichtung und 20+ Jahre Erfahrung unterstützt unsere 10 Jahre Qualitätsgarantie.

Contact our Kundenservice-Team um Muster anzufordern und unsere flexiblen Mindestbestellrichtlinien zu besprechen.