Medidor de agua de 1/2″ aprobado por la MID

Medidor de agua de 1/2″ aprobado por la MID

1/2″ water meter MID Approved corresponds to a nominal diameter of ​​DN15​​ (15mm in diameter), also called DN15 Water Meter.

1/2″ Water Meter Flow Rate

According to ISO 4064, R160 1″ water meter flow rate:

1/2 inch water meter minimum flow rate Q₁ is 16.625 l/h.
1/2 inch water meter transitional flow rate Q₂ is 25 l/h.
1/2 inch water meter permanent flow rate Q₃ is 2.5 m³/h.
1/2 inch water meter overload flow rate Q₄ is 3.125 m³/h.

1/2″ Water Meter Installation

According to the design schemes of different water meters, the installation direction of the 1″ water meter will affect its measurement accuracy. For horizontal water meters, the accuracy during horizontal installation is higher than that during vertical installation.

1″ water meter Horizontal installation accuracy R160
1″ water meter Vertical installation accuracy R80

1/2″ Water Meter with Fittings

Water meter fittings also play a crucial role in determining water quality.
BMAG’s 1-inch water meters are equipped with high-quality brass fittings and plastic check valve cores.
The water meter check valve core effectively prevents water backflow, which can otherwise affect the water meter’s measuring.

1/2″ Water Meter MID Approved Feature

• High precision: R160-Horizontal/R80-Vertical
• High protection class: IP68
• El principio de funcionamiento multichorro garantiza una larga vida útil
• Low-pressure loss: Δ63
• Straight inlet or outlet needed: U0 D0
• Rotating: 359 degrees
• Certification: MID
• A special glass with high resistance to pressure and impact is available
• Cuerpo pintado electrostáticamente de latón resistente a la corrosión
• Protección contra campos magnéticos externos
• Las funciones de salida de pulsos y lectura AMR son opcionales
• Non-return valve and filter available
• Apto para agua potable, agua fría hasta 50°C.
• Casi ningún mantenimiento
• Mecanismo de aspiración

1/2″ Multi Jet Water Meter Working Conditions

• Temperatura: Disponible para agua fría 0-50 ℃
• Presión: ≤1.6MPa (16bares)

Cumplimiento de estándares

• ISO4064:2014/OIML R49
• Directiva 2014/32/UE sobre instrumentos de medida
• Norma Europea EN14154

Dimensión

Datos técnicos

Nuestro 35.000 m² instalaciones y 20+ años de experiencia respaldan 10 años Garantía de calidad.

Contacta con nosotros Equipo de Servicio al Cliente para solicitar muestras y analizar nuestras políticas flexibles de pedidos mínimos.