Medidor de agua de chorro múltiple de 3/4″ Certificación MID

3/4″ Medidor de agua de chorro múltiple

A 3/4″ water meter, corresponding to a nominal diameter of 20mm (DN20), is a common size for various applications. It is frequently utilized in residential, commercial, and light industrial settings that require moderate flow rates. Its design ensures reliable performance and accurate measurement in environments demanding a consistent water supply.

3/4″ Multi Jet Water Meter Flow Rate

According to ISO 4064, for a 3/4″ water meter with an R160 accuracy class, typical flow rate parameters are as follows:

• 3/4″ water meter Minimum Flow Rate (Q1): 25 L/h

• 3/4″ water meter Transitional Flow Rate (Q2): 40 L/h

• 3/4″ water meter Permanent Flow Rate (Q3): 4.0 m³/h

• 3/4″ water meter Overload Flow Rate (Q4): 5.0 m³/h

3/4 Inch Multi Jet Water Meter Installation

The installation orientation of a 3/4 inch water meter significantly impacts its measurement accuracy, a factor dependent on the meter’s specific design. For horizontal-type water meters, optimal accuracy is achieved with horizontal installation. This accuracy is typically higher than if the same meter were installed vertically.

• 3/4″ Water Meter Horizontal Installation Accuracy: R160

• 3/4″ Water Meter Vertical Installation Accuracy:  R80

3/4 Inch Multi-Jet Water Meter with Fittings

The quality of water meter fittings plays an important role in maintaining water quality and ensuring a durable installation.
BMAG’s 3/4 inch water meters are supplied with high-quality brass fittings and incorporate a plastic check valve core. This integrated check valve core effectively prevents water backflow, which is crucial for protecting the water supply and ensuring the continued accuracy of the meter’s readings.

Característica

• High precision: R160-Horizontal
• High protection class: IP68
• El principio de funcionamiento multichorro garantiza una larga vida útil
• Low-pressure loss: Δ63
• Straight inlet or outlet needed: U0 D0
• Certification: MID
• A special glass with high resistance to pressure and impact is available
• Cuerpo pintado electrostáticamente de latón resistente a la corrosión
• Protección contra campos magnéticos externos
• Las funciones de salida de pulsos y lectura AMR son opcionales
• Non-return valve and filter available
• Apto para agua potable, agua fría hasta 50°C.
• Casi ningún mantenimiento
• Mecanismo de aspiración

3/4″ Multi Jet Water Meter Working Conditions

• Temperatura: Disponible para agua fría 0-50 ℃
• Presión: ≤1.6MPa (16bares)

Diseño de placa de dial (DN15, R160)

Cumplimiento de estándares

• ISO4064:2014/OIML R49
• Directiva 2014/32/UE sobre instrumentos de medida
• Norma Europea EN14154

Dimensión

Datos técnicos

Nuestro 35.000 m² instalaciones y 20+ años de experiencia respaldan 10 años Garantía de calidad.

Conéctate con nuestro Equipo de Servicio al Cliente para solicitar muestras y analizar nuestras políticas flexibles de pedidos mínimos.