Compteur d'eau d'irrigation | Agriculture
BMAG Irrigation and Agriculture Water Meter a water meter with magnetic transmission, super dry type register for Irrigation and Agriculture application with sizes from Dn50 to Dn300
Copper can with IP68 protection. Suitable for irrigation, agriculture, wastewater water and bad water quality applications
| Matériel | Fonte |
|---|---|
| Connecter | Bride |
| Rapport | R40 |
| Impulsion | Facultatif |
| enrobage | Facultatif |
détails du produit
BMAG WPI-SDC Irrigation Water Meter | Agriculture
Caractéristique du compteur d'eau d'irrigation
- It is an Irrigation water meter with magnetic transmission, super dry type register for Irrigation and Agriculture applications with sizes from Dn50 to Dn300
- Suitable for irrigation, agriculture, wastewater water and bad water quality applications
- An iron body with an inside and outside epoxy coating for protecting the corrosion
- Raccordement à bride : DIN PN16/10, ANSI 125/150lb
- The copper can be a super dry register with IP68 protection
- The entire head area, including counter and transmitter, is 360° rotatable for an easy reading
- The interchangeable, removable measuring mechanism can be easily removed from the body for checking, maintaining, and replacing, no needing to dismantle the body form the pipe
- Roulements en plastique résistant à l'usure
- Dial Plate Design can be as per the customer’s requirement
- Transmission magnétique, faible perte de charge
- Classe A
La sortie d'impulsion est disponible, les détails sont les suivants :
- The Pulse Emitter Device consists of a plastic housing with a Reed Switch, and 1,5 m cable with 2 cores in Red and Black
- Données électriques : Vmaximum = 24 CA/CC ; jemax=0,01A
- Capacité de l'émetteur d'impulsions :
Les conditions de travail
- Température : disponible pour l'eau froide 0-50 ℃
- Pression : ≤1,6MPa (16bars)
Conformité aux normes
- ISO4064:2014/OIML R49
- Directive 2014/32/UE relative aux instruments de mesure
- Norme européenne EN14154
Dimension (norme de bride pour la sélection comme DIN, ANSI…)

données techniques
MAX. ERREUR D'AUTORISATION :
- Du premier trimestre inclus jusqu'au deuxième trimestre excluant, ± 5%
- Du T2 inclus au T4 inclus, ± 2% pour T30 et ± 3% pour T50
Notre 35 000 m² installation et 20+ ans revivre notre expérience 10 ans qualité garantie.
Connectez-vous avec notre L'équipe de service à la clientèle pour demander des échantillons et discuter de nos politiques flexibles de commande minimum.
Produits apparentés










