1/2″ वाटर मीटर एमआईडी द्वारा अनुमोदित
1/2″ वाटर मीटर एमआईडी द्वारा अनुमोदित
| कलई करना | वैकल्पिक |
|---|---|
| जोड़ना | BSP Thread, NPT Thread |
| अनुपात | 80 रुपये, 100 रुपये, 160 रुपये |
| माप की इकाई | घन फुट, घन मीटर, गैलन, लीटर |
| सामग्री | पीतल |
| Temperature | 50℃（122℉）, 30℃（86℉）, 105℉（40℃） |
1/2″ वाटर मीटर एमआईडी द्वारा अनुमोदित
1/2″ water meter MID Approved corresponds to a nominal diameter of DN15 (15mm in diameter), also called DN15 Water Meter.
1/2″ Water Meter Flow Rate
According to ISO 4064, R160 1″ water meter flow rate:
1/2 inch water meter minimum flow rate Q1 is 16.625 l/h.
1/2 inch water meter transitional flow rate Q2 is 25 l/h.
1/2 inch water meter permanent flow rate Q3 is 2.5 m³/h.
1/2 inch water meter overload flow rate Q4 is 3.125 m³/h.
1/2″ Water Meter Installation
According to the design schemes of different water meters, the installation direction of the 1″ water meter will affect its measurement accuracy. For horizontal water meters, the accuracy during horizontal installation is higher than that during vertical installation.
1″ water meter Horizontal installation accuracy R160
1″ water meter Vertical installation accuracy R80
1/2″ Water Meter with Fittings
Water meter fittings also play a crucial role in determining water quality.
BMAG’s 1-inch water meters are equipped with high-quality brass fittings and plastic check valve cores.
The water meter check valve core effectively prevents water backflow, which can otherwise affect the water meter’s measuring.
1/2″ Water Meter MID Approved Feature
- High precision: R160-Horizontal/R80-Vertical
- High protection class: IP68
- Multi-jet working principle assures a long service time
- Low-pressure loss: Δ63
- Straight inlet or outlet needed: U0 D0
- Rotating: 359 degrees
- Certification: MID
- A special glass with high resistance to pressure and impact is available
- Electrostatic painted body made of corrosion-resistant brass
- बाह्य चुंबकीय क्षेत्रों से सुरक्षा
- Pulse output and AMR reading features are optional
- Non-return valve and filter available
- Suitable for potable water, cold water up to 50°C
- Almost no maintenance
- Vacuumed mechanism
1/2″ Multi Jet Water Meter Working Conditions
- तापमान: ठंडे पानी के लिए उपलब्ध (0-50 ℃)
- दबाव: ≤1.6MPa (16 बार)
मानकों का अनुपालन
- आईएसओ4064:2014/ओआईएमएल आर49
- मापन उपकरणों पर निर्देश 2014/32/ईयू
- यूरोपीय मानक EN14154
आयाम
तकनीकी डाटा
हमारा 35,000 वर्ग मीटर सुविधा और 20+ वर्ष of experience back our 10 साल गुणवत्ता की गारंटी।.
Contact our ग्राहक सेवा टीम नमूने मंगवाने और हमारी लचीली न्यूनतम ऑर्डर नीतियों पर चर्चा करने के लिए।.
