1 इंच का वाटर मीटर (एमआईडी प्रमाणित)

1″ Water Meter

1″ water meter corresponds to a nominal diameter of ​​DN25​​ (25mm in diameter), also called DN25 Water Meter. This specification is primarily used in industrial and manufacturing facilities that require high flow rates and high water pressure. Its design ensures reliability in demanding environments, such as large-scale water distribution systems or production lines with significant water consumption demands.

1″ Water Meter Flow Rate

According to ISO 4064, R160 1″ water meter flow rate:

1 inch water meter minimum flow rate Q₁ is 39.375 l/h.
1 inch water meter transitional flow rate Q₂ is 63 l/h.
1 inch water meter permanent flow rate Q₃ is 6.3 m³/h.
1 inch water meter overload flow rate Q₄ is 7.875 m³/h.

1″ Water Meter Installation

According to the design schemes of different water meters, the installation direction of the 1″ water meter will affect its measurement accuracy. For horizontal water meters, the accuracy during horizontal installation is higher than that during vertical installation.

1″ water meter Horizontal installation accuracy R160
1″ water meter Vertical installation accuracy R80

1″ Water Meter with Fittings

Water meter fittings also play a crucial role in determining water quality.
BMAG’s 1-inch water meters are equipped with high-quality brass fittings and plastic check valve cores.
The water meter check valve core effectively prevents water backflow, which can otherwise affect the water meter’s measuring.

1″ Water Meter Feature

• High precision: R160-Horizontal/R80-Vertical
• High protection class: IP68
• Multi-jet working principle assures a long service time
• Low-pressure loss: Δ63
• Straight inlet or outlet needed: U0 D0
• Rotating: 359 degrees
• Certification: MID
• A special glass with high resistance to pressure and impact is available
• Electrostatic painted body made of corrosion-resistant brass
• बाह्य चुंबकीय क्षेत्रों से सुरक्षा
• Pulse output and AMR reading features are optional
• Non-return valve and filter available
• Suitable for potable water, cold water up to 50°C
• Almost no maintenance
• Vacuumed mechanism

1″ Multi Jet Water Meter Working Conditions

• तापमान: ठंडे पानी के लिए उपलब्ध (0-50 ℃)
• दबाव: ≤1.6MPa (16 बार)

Dial Plate Design (DN25, R160)

मानकों का अनुपालन

• आईएसओ4064:2014/ओआईएमएल आर49
• मापन उपकरणों पर निर्देश 2014/32/ईयू
• यूरोपीय मानक EN14154

आयाम

तकनीकी डाटा

हमारा 35,000 वर्ग मीटर सुविधा और 20+ वर्ष of experience back our 10 साल गुणवत्ता की गारंटी।.

Contact our ग्राहक सेवा टीम नमूने मंगवाने और हमारी लचीली न्यूनतम ऑर्डर नीतियों पर चर्चा करने के लिए।.