1/2" Su Sayacı MID Onaylı
1/2" Su Sayacı MID Onaylı
| Kaplama | İsteğe bağlı |
|---|---|
| Bağlamak | BSP Dişli, NPT Dişli |
| Oran | R80, R100, R160 |
| Ölçü Birimi | Kübik fit, kübik metre, galon, litre |
| Malzeme | Pirinç |
| Temperature | 50℃(122℉), 30℃(86℉), 105℉(40℃) |
1/2" Su Sayacı MID Onaylı
1/2″ water meter MID Approved corresponds to a nominal diameter of DN15 (15mm in diameter), also called DN15 Water Meter.
1/2″ Water Meter Flow Rate
According to ISO 4064, R160 1″ water meter flow rate:
1/2 inch water meter minimum flow rate Q1 is 16.625 l/h.
1/2 inch water meter transitional flow rate Q2 is 25 l/h.
1/2 inch water meter permanent flow rate Q3 is 2.5 m³/h.
1/2 inch water meter overload flow rate Q4 is 3.125 m³/h.
1/2″ Water Meter Installation
According to the design schemes of different water meters, the installation direction of the 1″ water meter will affect its measurement accuracy. For horizontal water meters, the accuracy during horizontal installation is higher than that during vertical installation.
1″ water meter Horizontal installation accuracy R160
1″ water meter Vertical installation accuracy R80
1/2″ Water Meter with Fittings
Water meter fittings also play a crucial role in determining water quality.
BMAG’s 1-inch water meters are equipped with high-quality brass fittings and plastic check valve cores.
The water meter check valve core effectively prevents water backflow, which can otherwise affect the water meter’s measuring.
1/2″ Water Meter MID Approved Feature
- High precision: R160-Horizontal/R80-Vertical
- High protection class: IP68
- Multi-jet working principle assures a long service time
- Low-pressure loss: Δ63
- Straight inlet or outlet needed: U0 D0
- Rotating: 359 degrees
- Certification: MID
- A special glass with high resistance to pressure and impact is available
- Electrostatic painted body made of corrosion-resistant brass
- Dış manyetik alanlara karşı koruma
- Nabız çıkışı ve AMR okuma özellikleri isteğe bağlıdır.
- Geri dönüşsüz vana ve filtre mevcuttur.
- Suitable for potable water, cold water up to 50°C
- Neredeyse hiç bakım gerektirmiyor.
- Vakumlu mekanizma
1/2″ Multi Jet Water Meter Working Conditions
- Sıcaklık: 0-50 ℃ arası soğuk su için uygundur.
- Basınç: ≤1,6 MPa (16 bar)
Standartlara Uygunluk
- ISO4064:2014/OIML R49
- Ölçüm cihazlarına ilişkin 2014/32/AB sayılı Direktif
- Avrupa Standardı EN14154
Boyut

Teknik Veriler

Bizim 35.000 m² tesis ve 20+ yıl of experience back our 10 yıllık Kalite garantisi.
Contact our müşteri hizmetleri ekibi Numune talep etmek ve esnek minimum sipariş politikalarımız hakkında bilgi almak için lütfen iletişime geçin.









